vos_remsite - Removes a read-only site definition from the Location Service
vos remsite -server <machine name> -partition <partition name> -id <volume name or ID> [-force] [-cell <cell name>] [-noauth] [-auth] [-localauth] [-encrypt [<yes|no>]] [-verbose] [-noresolve] [-config <configuration file>] [-help]
The vos remsite command delists from the Location Service the read-only replication site for the volume specified by the -id argument located on the site specified by the -server and -partition arguments.
This command is useful for removing read-only sites that were created with the vos_addsite(1) command but to which a read-only volume was never released with the vos_release(1) command.
When the -force argument is specified the vos remsite command can be used to delist the replication site and leave the volume data in place at the site.
If a read-only volume already exists at the site, the vos_remove(1) command should be used to remove the site. The vos_remove(1) command will remove the volume from the site and delists the site from the Location Service whereas vos remsite will only perform the latter operation.
If a read-only site definition is delisted from the Location Service leaving behind a read-only volume on the site, the Location Service and the File Server will be out of sync. The cell administrator can synchronize the Location Service and File Server using the vos_syncfs(1) and vos_syncloc(1) commands; or the cell administrator can use the vos_zap(1) command to destroy the read-only volume on the File Server.
Identifies the File Server for which the read-only site should be removed. Provide a fully qualified host name, an IP address or UUID as reported by vos_listfs(1).
Identifies the partition on the File Server named by the -server argument for which the read-only site should be removed.
Provide the partition's complete name with preceding slash (for example,
/vicepa
) or use one of the three acceptable abbreviated forms.
For details,
see vos(1)
Specifies either the complete name or volume ID number of the read/write volume for which a read-only site should be removed.
Permits the delisting of a readonly
site from the Location Service when the volume is still present at the site specified by the -server and -partition arguments,
when the specified server is unreachable,
or when the specified partition is no longer attached.
If subsequently the server or partition becomes available the vos_zap(1) command should be used to destroy the read-only volume on the File Server.
Names the cell in which to run the command. Do not combine this argument with the -localauth flag. For more details, see vos(1).
Assigns the unprivileged identity anonymous
to the issuer.
Do not combine this flag with the -localauth flag.
For more details,
see vos(1).
Obtains an authentication token using the server encryption key with the highest key version number in the local /etc/yfs/server/KeyFileExt file. The resulting token never expires and has Super User privileges. Do not combine this flag with the -cell argument or -noauth flag. For more details, see vos(1).
Use the calling user's tokens from the kernel or as obtained using the active Kerberos ticket granting ticket to communicate with the Volume Server and Location Service. This is the default if neither -localauth nor -noauth is given.
Since this option is the default, it is usually not useful for running single command line operations. However, it can be useful when running commands via vos_interactive(1) or vos_source(1), since otherwise it would be impossible to switch from, for example, -localauth back to using regular tokens during a bulk operation.
Produces on the standard output stream a detailed trace of the command's execution. If this argument is omitted, only warnings and error messages appear.
Enables or disables encrytion for the command so that the operation's results are not transmitted across the network in clear text.
Shows all servers as IP addresses instead of the reverse DNS lookup hostname.
-noresolve useful when troubleshooting no such volume
and volume moved
errors.
Set the location of the configuration file to be used. The default file is /etc/yfs/yfs-client.conf.
Prints the online help for this command. All other valid options are ignored.
The following command delists the read-only volume root.cell.readonly
from the partition /viceph on the File Server fs5.your-cell-name.com
from the Location Service.
% vos remsite -server fs5.your-cell-name.com -partition h -id root.cell
The issuer must be listed in the /etc/yfs/server/UserListExt file on the File Server specified by the -server argument and on each Location Server. If the -localauth flag is included, the issuer must instead be logged on to a server with an account capable of reading the /etc/yfs/server/KeyFileExt file.
vos(1), vos_remove(1), vos_zap(1)
IBM Corporation 2000. http://www.ibm.com/ All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0. It was converted from HTML to POD by software written by Chas Williams and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.
"AFS" is a registered mark of International Business Machines Corporation, used under license. (USPTO Registration 1598389)
"OpenAFS" is a registered mark of International Business Machines Corporation. (USPTO Registration 4577045)
The "AuriStor" name, log 'S' brand mark, and icon are registered marks of AuriStor, Inc. (USPTO Registrations 4849419, 4849421, and 4928460) (EUIPO Registration 015539653).
"Your File System" is a registered mark of AuriStor, Inc. (USPTO Registrations 4801402 and 4849418).
"YFS" and "AuriStor File System" are trademarks of AuriStor, Inc.